Corporation Network Router User Manual

IN-tact 1101 Software Configuration Guide 23
Configuration Screens Configuring the IN-tact 1101
Security Settings Screen
On the navigation tree, click IN-tact Setup > System Setup > Security. The Security Settings
screen appears:
This screen is used to set IN-tact 1101 security features. It also appears the first time you log in
to the device with the default password. If you have already set the password, you can skip this
screen and continue with configuration.
You can change the IN-tact 1101 password whenever necessary. There is one default user
name for log in (admin) and it cannot be changed. There is no default time period for password
expiration; the password you set remains valid until it is changed.
Password guidelines:
• A minimum of eight characters are required, maximum of 32 characters
• Any combination of characters is permitted
• Mixed case (upper and lowercase) is permitted
• Default password is “12345678”.
To change the password:
1. Type the current password in the Old Password field. For security purposes, your entry will
appear as a series of asterisks.
2. Type the new password in the New Password field. It must be at least eight characters.
3. Type the new password again in the Retype New Password field to confirm.
4. Click Apply to temporarily save your settings. Your changes are immediately written to
persistent memory. The new password is in effect the next time you log in to the IN-tact 1101.