User Manual
9
OPERATION
INTENDED USE:
The blower is intended for residential use only. Use the blower outdoors to move yard debris as
needed.
WARNING: To avoid injury from unexpected starting or electrical shock during assembly or
adjustment, do not plug the power cord into a source of power.
ASSEMBLY
1. ASSEMBLING AND DISASSEMBLING THE BLOWER TUBE (SEE A & B)
Note: Before assembling and disassembling the Blower Tube, be sure the on/o switch is in ‘’0’’ O position
and the plug is removed.
Slide the lower blower tube to upper blower tube and slide blower tube to the motor housing(See A). Ensure
the hole in the tube matches up with the tube release button in the housing.
Press the tube release button, so that you can separate the tube (See B). Do not try to separate the tubes by
force or by using tools.
2. ATTACHING THE EXTENSION CORD (SEE C)
TECHNICAL DATA
Rated Voltage 120V~60Hz
Air ow 450CFM(12.78m
3
/min)
Rated power 7.5A
No load speed 25000/min
Blower speed 100mph (160km/h)
Speed control 2- Speed
Machine weight 6.6lbs (3kg)
Protection degree
/ll
Lower blower tube 1
Upper blower tube 1
We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel can assist you and oer advice.
ACCESSORIES
ASSEMBLY & OPERATION