User Manual

Starting:
1. Push in the lock-off button and
depress the on/Off switch at the same
time.
2. Release the lock-off button.
Stopping:
Release the on/Off switch.
Cutting hedges
Before cutting check the hedge for foreign
objects e. g. wire fences.
Cut stems up to 8 mm in thickness. When
cutting, move steadily along the line of cut, so
that stems are fed directly into the cutter
blades. The double edge of the cutting blade
enables cutting to either direction, or with a side
to side motion.
After use replace the blade transport guard.
0PERATION 0PERATION 0PERATION
Guide the machine along the edge of
the lawn. Do not allow the blade to
contact paved surfaces, stones or
garden walls, since
this will wear the blade rapidly.
4 5 6
HT19-401-003-20
Grass Shear
7.2
VOLT