User Manual

CHARGING PROCEDURE

Plug charger plug into a suitable

power outlet and afterwards plug

your tool into the battery charger, the

indicator light will turn red to show

that the charging has started. It will

turn green until the battery is fully

charged.

Press the tool-free blade cover

release button.

ASSEMBLY

Press the blade cover back to the

housing.

ASSEMBLY

1 2 3

HT19-401-003-20

Grass Shear

7.2

VOLT

PAGE 1
7.2 HT19-401-003-20 VOLT Grass Shear 1 2 3 CHARGING PROCEDURE ASSEMBLY ASSEMBLY 2 1 Plug charger plug into a suitable power outlet and afterwards plug your tool into the battery charger, the indicator light will turn red to show that the charging has started. It will turn green until the battery is fully charged. Press the tool-free blade cover release button. Press the blade cover back to the housing.
PAGE 2
7.2 HT19-401-003-20 VOLT Grass Shear 4 5 6 0PERATION 0PERATION 0PERATION Cutting hedges Before cutting check the hedge for foreign objects e. g. wire fences. Cut stems up to 8 mm in thickness. When cutting, move steadily along the line of cut, so that stems are fed directly into the cutter blades. The double edge of the cutting blade enables cutting to either direction, or with a side to side motion. After use replace the blade transport guard. Guide the machine along the edge of the lawn.