User Manual

22
Symptom Possible Cause Remedy
Chain saw fails to
operate
Out of battery. Charge the battery pack.
Fuse faulty. Replace fuse.
Chain saw
operates
intermittently
Over heating
Place the machine in a cool, ventilated place
to cool it down
Applying too much pressure while
cutting.
Applying relatively less pressure while
cutting
Loose connection.
Contact service agent.Internal wiring defective.
On/o switch defective.
Dry chain
No oil in reservoir Rell oil
Vent in oil ller cap clogged Clean cap
Oil passage clogged Clean oil passage outlet
Chain/chain bar
over-heats
No oil in reservoir Rell oil
Vent in oil ller cap clogged Clean cap
Oil passage clogged Clean oil passage outlet
Chain is over tensioned Adjust chain tension
Dull chain Sharpen chain or replace
Chain saw rips,
vibrates, does not
saw properly
Chain tension too loose Adjust chain tension
Dull chain Sharpen chain or replace
Chain worn out Replace chain
Chain teeth are facing in the wrong
direction
Reassemble with chain in correct direction
FOR BATTERY TOOLS
The ambient temperature range for the use and storage of tool and battery is 0
o
C-45
o
C.
The recommended ambient temperature range for the charging system during charging is 0
o
C-40
o
C.