User Manual

CHARGING PROCEDURE ASSEMBLY

1) Plug the charger into an appropriate outlet. The

light will be green.

2) Slide the battery pack into the charger, the light will

turn to red to indicate the charging process has started.

3) When charging is completed, the light will turn to

green.

After recharging, insert the battery pack into the

battery port. A simple push and slight pressure will

be sufficient until a click is heard.

Assembling the blower tube

1 2 3

INSTALLING THE BATTERY

PACK

HT19-401-003-05

40V Turbine Blower40

VOLT

MAX

PAGE 1
40 HT19-401-003-05 VOLT MAX 40V Turbine Blower 1 2 3 CHARGING PROCEDURE INSTALLING THE BATTERY PACK ASSEMBLY 1) Plug the charger into an appropriate outlet. The light will be green. 2) Slide the battery pack into the charger, the light will turn to red to indicate the charging process has started. 3) When charging is completed, the light will turn to green. After recharging, insert the battery pack into the battery port. A simple push and slight pressure will be sufficient until a click is heard.
PAGE 2
40 HT19-401-003-05 VOLT MAX 40V Turbine Blower 4 5 6 ASSEMBLY OPERATION OPERATION 2 1 Press the tube release button, so that you can slide blower tube to the motor housing.