Manualshelf

User Manual

ManualsBrandsHyper Tough ManualsHyper Tough Home ImprovementPolarized Analog Indoor Mini Timer, Single Outlet
12
WC1006 / WCH1006
Indoor Timer
FEATURES
• 1 Polarized Outlet
• Turns lights/appliances ON and OFF at programmed daily settings
• Programmable in 30 minute intervals
• Max. 24 ON/OFF per day
• CFL & LED compatible
• Manual Override switch
WARNINGS
• This unit is to be connected to a 125V, 60Hz power source only.
• Total Capacity: 15A 1875W Resistive, 1250W Tungsten
(Lighting). 1/4 HP. Do not exceed rated capacity.
• Do not use with any appliance which exceeds the
capacity of the Timer.
• Always ensure that the plug of any appliance is
fully inserted into the Timer.
• If you need to clean the Timer, remove from the
mains and wipe with a dry cloth. Do not immerse in water or
any liquid.
• FOR INDOOR USE ONLY.
• Do not attempt to disassemble unit. There are
no serviceable parts inside.
• RISK OF ELECTRIC SHOCK:
o Keep children away.
o Unplug timer before cleaning.
o Do not use in wet locations.
• RISK OF FIRE: Do not use to control appliances
that contain heating elements (Cooking appliances,
heaters, irons, etc…)
• PLEASE READ THROUGH THE INSTRUCTIONS PRIOR TO USE.
The electrical system and the method of connecting this timer to the system must be in accordance with local, state,
and national electric codes.
INSTRUCTIONS
1. Turn the dial clockwise until the current time lines up with the “Time Now” indicator arrow.
NOTE: The dark area on the dial denotes nighttime hours. The white area denotes daytime hours.
2. Set the switch to the TIMER ON position.
3. With your finger pull up all the tabs. Determine your desired ‘ON’ period and press down all tabs corresponding to the required ‘ON’ period. For example, if you want your
appliance to turn ‘ON’ at 6:00pm and ‘OFF’ at 10:00pm, push down all the tabs between the 6pm and the 10pm in the BLACK section on the dial.
4. Connect appliance to the timer and plug timer into power source, making sure the appliance is turned on.
5. The pre-set On/Off commands can be interrupted by using the manual override switch located on the top of the unit. When switched to the OUTLET ON position, the connected
appliance is switched on permanently. To reactivate the timer’s control of the appliance, turn the appliance switch on and set the timer’s override switch to TIMER ON.
Made in China, Hecho en China
999-61437_WC1006_REVA 06/15

Summary of content (2 pages)