AQ20021G 1.5AMP DETAIL SANDER Electronic Version of this Manual Available on Walmart.
Contents Overview........................................................................................................................................................ 3 Work area safety............................................................................................................................................. 4 Electric safety................................................................................................................................................. 4 Personal safety..
1.5Amp Detail Sander Overview Tool Anatomy A. Dust-sealed On/off Switch B. Dust Bag C. Dust Extraction Port Adapter D. Sanding Pad A B C D Please read before returning this product for any reason: If you have question or experience a problem with your Hyper Tough purchase, call 1-800-840-7856 from 8:00 a.m. to 8:00 p.m. Eastern Standard Time, Monday through Friday. SAFETY GUIDELINES Be sure to read and understand this manual for your safety.
1.5Amp Detail Sander Workplace/Electrical Safety SAVE THESE WARNINGS AND INSTRUCTIONS YOU MAY NEED TO REFER TO THEM LATER The term “power tool” in the WARNING refers to your AC power (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
1.5Amp Detail Sander Personal safety/Power tool use and care PERSONAL SAFETY 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. 2. Use personal protective equipment. Always wear eye protection.
1.5Amp Detail Sander Service/Additional safety rules power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. 4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. 5. Maintain power tools.
1.5Amp Detail Sander Additional safety rules ground. If tools with large battery packs can stand upright, but they’re easily tipped over, which could cause result in an injury. 4.Power tools exert extreme force - be sure the item you’re working on is firmly secured with clamps or other reliable means. Do not try to hold them by hand or against your body – you might lose control and be injured. 5.
Symbols INSTALLING SANDPAPER WARNING: Unplug the sander before replacing sandpaper. NOTE: The Sander comes complete with a hook and loop style mounting system. Connect the sanding sheet to the sanding plate: - Turn the tool upside down. Next, align the sanding sheet with the sander’s base and press the sanding sheet firmly into place. - Confirm that the holes in the sanding sheet match the dust holes in the sanding plate. Holes must match for the dust system to work properly.
1.5Amp Detail Sander Operation/Troubleshooting WARNING: Considering that old paint may well be toxic and will have to be treated with the respect due any toxic material both on the part of the tool operator and environment. Wear appropriate breathing protection and dispose carefully of dust or chips left after sanding.
1.5Amp Detail Sander Maintenance/Specifications MAINTENANCE 1. Keep the vents clear of dust and debris. This will help prevent possible electrical shorts and ensure proper cooling. 2. Keep the tool housing clean, free of oil and grease by using mild soap and a damp (not wet) cloth. 3. Inspect the cord regularly and have it replaced by an authorized repair facility if it is damaged. 4. Lubrication for this tool is done at the factory and should not be necessary again under normal use. 5.
1.5Amp Detail Sander Warranty INCLUDES: • 1pc 1.5amp detail sander • 3pcs sandpaper (grit 60, 80, 120) . 1pc dust bag • 1pc instruction manual • 1pc dust extraction port adapter 2-YEAR LIMITED WARRANTY For 2 years from the date of purchase, this product is warranted for the original purchaser to be free from defects in materials and workmanship through normal use.
