Datasheet

Symbol Parameter
DDR3-800, 1066, 1333, 1600 & 1866
Unit Notes
Min Max
V
IX
(CK)
Differential Input Cross Point Voltage
rela
tive to VDD/2 for CK, CK
-150 150 mV 2
-175 175 mV 1
V
IX
(DQS)
Differential Input Cross Point Voltage
r
elative to VDD/2 for DQS,
DQS
-150 150 mV 2
Rev. 1.0 / Jul. 2012 23
Notes:
1. Extended range for V
IX
is only allowed for clock and if single-ended clock input signals CK and CK are
monotonic with a single-ended swing VSEL / VSEH of at least VDD/2 +/-250 mV, and when the differential
slew rate of CK - CK
is larger than 3 V/ns.
2. Refer to the table "Single-ended levels for CK, DQS, DQSL, DQSU, CK, DQS, DQSL or DQSU" on page 22
for VSEL and VSEH standard values.
Slew Rate Definitions for Single-Ended Input Signals
See 7.5 “Address / Command Setup, Hold and Derating” in “DDR3 Device Operation” for single-ended slew
rate definitions for address and command signals.

See 7.6 “Data Setup, Hold and Slew Rate Derating” in “DDR3 Device Operation” for single-ended slew rate
definition for data signals.
Cross point voltage for differential input signals (CK, DQS)