Certifications 2

Precautionary statements
Prevention
P210
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P261
Avoid breathing mist or vapour.
P280
Wear protective gloves/protective clothing/eye protection/face protection.
Response
P370 + P378
In case of fire: Use foam, carbon dioxide, dry powder or water fog for extinction.
Storage
P403 + P233
Store in a well-ventilated place. Keep container tightly closed.
Disposal
P501
Dispose of contents/container in accordance with local/regional/national/international regulations.
Supplemental label information
EUH066 - Repeated exposure may cause skin dryness or cracking.
This mixture does not contain substances assessed to be vPvB / PBT according to Regulation
(EC) No 1907/2006, Annex XIII.
2.3. Other hazards
SECTION 3: Composition/information on ingredients
3.2. Mixtures
General information
Notes
Index No.
REACH Registration No.
CAS-No. / EC No.
%
Chemical name
Classification:
Flam. Liq. 2;H225, Eye Irrit. 2;H319, STOT SE 3;H336
606-001-00-8Acetone #-67-64-1
200-662-2
25 - 50
Classification:
-
-Silicon dioxide 01-2119379499-16-xxxx7631-86-9
231-545-4
10 - 20
Classification:
Acute Tox. 4;H302, STOT RE 2;H373
603-027-00-1Ethylene glycol #-107-21-1
203-473-3
≤ 1
List of abbreviations and symbols that may be used above
#: This substance has been assigned Community workplace exposure limit(s).
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in
percent by volume. The full text for all H-statements is displayed in section 16.
Composition comments
SECTION 4: First aid measures
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves. Wash contaminated clothing before reuse.
General information
4.1. Description of first aid measures
Move into fresh air and keep at rest. If not breathing, give artificial respiration or give oxygen by
trained personnel. Get medical attention if any discomfort continues.
Inhalation
Take off immediately all contaminated clothing. Wash skin thoroughly with soap and water. If
irritation persists get medical attention.
Skin contact
Flush eyes thoroughly with water for at least 15 minutes. Remove any contact lenses. Get medical
attention if any discomfort continues.
Eye contact
Rinse mouth thoroughly. Drink a few glasses of water or milk. Get medical attention if any
discomfort continues.
Ingestion
Irritation of eyes and mucous membranes. Vapours may cause drowsiness and dizziness.
Prolonged or repeated skin contact may cause drying, cracking, or irritation.
4.2. Most important symptoms
and effects, both acute and
delayed
Provide general supportive measures and treat symptomatically. Thermal burns: Flush with water
immediately. While flushing, remove clothes which do not adhere to affected area. Call an
ambulance. Continue flushing during transport to hospital. Keep victim under observation.
4.3. Indication of any
immediate medical attention
and special treatment needed
SECTION 5: Firefighting measures
The product is highly flammable, and explosive vapour/air mixtures may be formed even at normal
room temperatures. Vapours are heavier than air and may travel along the ground to some distant
source of ignition and flash back.
General fire hazards
5.1. Extinguishing media
Water spray, foam, dry powder or carbon dioxide.
Suitable extinguishing
media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
Hylomar M/Aerograde Ultra PL32A- Light, Medium and Heavy Grades SDS UK
903698 Version #: 02 Revision date: 05-September-2018 Issue date: 23-August-2018
2 / 9