Service Manual Manual

19
BEST PRACTICE Factory recommended
Mount pump vertically and use spill recovery to
run chemical back to tank in the event of tube
failure.
Chemical drains back into solution tank,
preventing spillage on the ground/floor and keeps
chemical from collecting in tube housing.
Spill
Recovery
NOTE Additional information
Screws are self-tapping; back off screws to find
original thr
eads.
If scr
ew bosses are stripped, use
alternate bosses and position them opposite each
other. The pump housing must flex to avoid pump head
cracking. Do not use more than two screws.
Continued...
Vertical
Mount