Service Manual User Manual

Page 7
Timer Features
Setting the Time of Day
Press and hold either the Up or Down buttons until the programming icon replaces the service icon and the
parameter display reads TD.
Adjust the displayed time with the Up and Down buttons.
When the desired time is set, press the Extra Cycle button to resume normal operation. The unit will also
return to normal operation after 5 seconds if no buttons are pressed.
Queueing a Regeneration
Press the Extra Cycle button. The service icon will ash to indicate that a regeneration is queued.
To cancel a queued regeneration, press the Extra Cycle button.
Regenerating Immediately
Press and hold the Extra Cycle button for ve seconds.
1.
2.
3.
1.
2.