Manualshelf

Service Manual User Manual

ManualsBrandsHydrotech ManualsWater purifiers5600 SXT Downflow
11121314151617181920
Page 18
Master Programming Mode
17. Meter Pulse Setting (Display Code K)
Press the Extra Cycle button. Use this display to specify the meter pulse setting for a non-standard ow meter.
This option setting is identied by “K” in the upper left-hand corner of the screen. Use the Up and Down buttons to
enter the meter constant in pulses per unit volume.
18. Press the Extra Cycle button to save all settings and exit Master Programming Mode.