Installation Sheet

4
Fill tub with water to the overflow and then drain the tub
while inspecting the waste connections below the floor
for leaks. Access from below will be necessary for this step
(Figure 8).
17
FIGURE 8
FIGURE 6B
FIGURE 6A
Apply generous bead of adhesive or silicone to the
bottom of the tub supports (Figure 6A).
Then apply a bead of tub and tile caulk or silicone
around the edge of the base (Figure 6B).
16
14
15
FIGURE 7
Carefully set tub into position (Figure 7) and connect
the drain harware (previously installed).
INSTALLATION INSTRUCTIONS
Please refer to www.hydrosystem.com for
specific dimensions on your model bathtub.