Installation Sheet

– 6 –
USER CARE AND MAINTENANCE
WARNING: Any service or maintenance other then described below should be performed by a qualified service
representative. Call your Hydro Systems dealer for the name of a qualified service representative near you.
To maintain the “like new” look of your Hydro Systems acrylic bathtub, we recommend the following easy care
procedures.
• Never use abrasive cleaners
• Use common household, non-abrasive cleaners for most cleaning jobs such as Lysol Basin, Tub & Tile Cleaner®,
Glass Plus®, Simple Green®, Mr. Clean, and Top Job, or a mild dishwashing detergent such as Ivory® Liquid. Follow
the manufacturers’ directions and precausions. Rinse well and dry with a clean cloth.
• Do not use products such as acetone (nail polish remover), dry cleaning solution, lacquer thinners, gasoline, pine oil,
wintergreen, etc.
• Use Isopropyl rubbing alcohol to clean grease oil, paint or ink. Dry with a clean soft cloth.
• Avoid using razor blades, putty knives, or other metal instruments that might scratch the surface. Small scratches can
be removed by applying a thin coat of automotive paste wax and buffing lightly with a clean cloth. For deeper scratches
s
and the surface lightly with 600 grit “wet or dry” sand paper, rub out with fine buffing compound, and apply a coat of wax
CLEANING INSTRUCTIONS
GLOSS FINISH
• Clean with mild dish soap and water, any non abrasive product to clean high-gloss counter surfaces
will
work.
• Remove dust with a soft damp cloth, for example; microfiber or calico cloths.
• Clean oil, paint, ink or grease with rubbing alcohol and dry with a soft cloth.
P
lease do not use anything else other than what was instructed. Improper use can result in damage to the tub or
its finish and may void the warranty. Keep in mind, if you do end up damaging the tub, scratches can usually be
removed, buffed or polished out by an Authorized Hydro Systems Service Agent.