USER INSTRUCTIONS For ROOF ANCHOR Complied with ANSI Z359.18-2017 THIS INSTRUCTION APPLIED TO FOLLOWING MODELS: 14427, 14428 … 1 Rev.
Table of Contents WARNING ……………………………………………………………………………………………….Page 3 1. Limitations for Use ………………………………………………………………………………Page 3 2. Connection Compatibility Limitations……………………………………………………Page 4 3. Performance…………………………………………………………………………………………Page 5 4. Installation……………………………………..........................……………………………Page 5 5. Loading Direction Limitation…………………………………………………………………Page 6 6. Training…………………………………………………………………………………………………Page 7 7. Inspection………………………………………………………………………………………………Page 7 8.
Warning Current User Instructions must always be available to the user. Read and understand this instructions before using this equipment. This User Instructions is not to be removed except by the user of this equipment. User must read and fully understand the limitations and proper use of this equipment. Do not alter, relocate or add to this equipment without manufacturer’s authorization.
2. Connection Compatibility Limitations All equipment must be coupled only to compatible connectors that are suitable to your application. Ensure all connections are compatible in size, shape and strength. Ensure all connectors are fully closed and locked. Prohibit the use of snap hooks to engage to objects unless the following requirements are met: It must be a locking type snap hook. It must be explicitly designed for such a connection.
3. Performance The performance of equipment in accordance with the requirements of the ANSI Z359.18-2017. Model Features Material Minimum Breaking Strength (MBS) 14427 Reusable Plate Steel 5000 lbs / 22.2 kN 14428 Disposable Galvanized Steel 5000 lbs / 22.2 kN 4.
When installed as an anchor point on a flat surface or on one side of a peaked roof, the connecting fall arrest subsystem must not extend over the peak of the roof to the other side. When working on the opposing roof surface, installation of an additional Reusable Roof Anchor is required on that side. Anchor must be positioned to apply load in the long axis of the anchor bracket. After removal of the Reusable Roof Anchor, roof surface may require repairs.
6. Training Employers are responsible for providing training to any employee who may be exposed to fall hazards in order to enable the employee to recognize and reduce fall hazards. Training must be conducted by a Competent or Qualified Person. Trainer and trainees must not be exposed to fall hazards during the training course. 7. Inspection If inspection reveals any defect, inadequate maintenance, or unsafe condition, remove Reusable Roof Anchor from service immediately.
9. Labeling All labeling must be legible and attached to the equipment. 10. Inspection Log If equipment fails inspection IMMEDIATELY REMOVE FROM SERVICE. User must inspect prior to EACH use. Competent Person must do complete formal inspection at least 1 time per 6 month period. All inspection records must be made visible and available to all users at all times.
