Install Instructions

ELECTRO-WELLS™

Fuel Smart HydroStat

installed with Electro-Well™

When installed with the Hydrolevel Electro-Well™, Fuel

Smart HydroStat will provide both temperature and low

water cut-off functionality. If the control was supplied by

the boiler manufacturer, it was installed with an

Electro-Well™. The Electro-Well™ is available sepa-

rately for field installations.

Electro-Well™ Models

IMPORTANT:

For proper opera-

tion of the low

water cut-off func-

tion, there must

be a minimum of

½" clearance

between the cop-

per well tube and

any surface within

the boiler.

MAINTENANCE

Remove the Electro-Well™ from the heating system every five years and clean any scale or sediment deposits from all parts that

are exposed to the boiler water. After cleaning, reinstall the well using pipe sealing compound. Teflon tape is not recommended.