Install Instructions
LIMITED MANUFACTURER’S WARRANTY
We warrant products manufactured by Hydrolevel Company to be free from defects in material and workmanship for a period of two years from the date of manu-
facture or one year from the date of installation, whichever occurs first. In the event of any claim under this warranty or otherwise with respect to our products which
is made within such period, we will, at our option, repair or replace such products or refund the purchase price paid to us by you for such products. In no event shall
Hydrolevel Company be liable for any other loss or damage, whether direct, indirect, incidental or consequential. This warranty is your EXCLUSIVE remedy and shall
be IN PLACE OF any other warranty or guarantee, express or implied, including, without limitation, any warranty of MERCHANTABILITY or fitness for a particular
purpose. This warranty may not be assigned or transferred and any unauthorized transfer or assignment thereof shall be void and of no force or effect.
126 Bailey Road, North Haven, CT 06473 • Phone (203) 776-0473 • FAX (203) 764-1711 • www.hydrolevel.com
#45-353
Wire
Harness
1. Disconnect boiler wire harness from the
“DAMPER” port on the Integrated Con-
trol Module
and plug into female plug
adapter on #45-353 Wire Harness
.
2. Plug male adapter on #45-353 Wire Har-
ness into “DAMPER” port on the Inte-
grated Control Module
.
3. Plug the other end of the Wire Harness
into the Model 1100 low water cut-off
.
#45-353
Wire
Harness
#45-353 Wire Harness
For boilers equipped with Honeywell Integrated Boiler Control Module
#45-353 Wire Harness
For boilers equipped with United Technologies Integrated Boiler Control Module
Model 1100
(available separately)
Model 1100
(available separately)
1. Disconnect boiler wire harness from the
Vent Damper port on the Integrated Control
Module
and plug into female plug
adapter on #45-353 Wire Harness
.
2. Plug male adapter on #45-353 Wire Har-
ness into Vent Damper port on the Inte-
grated Control Module
.
3. Plug the other end of the Wire Harness into
the Model 1100 low water cut-off
.