SDS

ManualsBrandsHydroHalt ManualsBuilding materials5-gal. Water and Vapor Barrier Membrane

Office 1.801.886.9495 Fax 1.801.886.9497

NewLook International, Inc.

HydroHalt™

Safety Data Sheet

Issue Date 22-May-15 Revised 22-May-15

Section 1

Product and Company Identification:

Product Name:

HydroHalt™

Product Use:

Vapor Barrier Membrane

Manufacturer’s Name:

NewLook International, Inc.

Manufacturer’s Address:

1525 South Gladiola Street Suite 8 Salt Lake City, UT 84104

Information Phone:

NewLook International, Inc. 801.886.9495 or 877.763.9566

Emergency Contact:

CHEMTEL 1.800.255.3924, Outside the USA +1.813.248.0585

Section 2

Hazards Identification:

Product Hazard Category:

Acute Toxicity – Category 5 (Inhalation) Category 3 (Oral)

Skin Corrosion – Category 3

Eye Irritation – Category 2

Label Content: Pictogram

Signal Word: WARNING

Hazard Statement:

May cause eye irritation or damage

Causes skin irritation

May be fatal if ingested

May cause respiratory irritation

Precautionary Statement: Prevention

Wear Safety goggles to protect eyes.

Wear chemically resistant gloves and aprons to minimize contact with the skin.

When respiratory protection is required, use only NIOSH/MSHA approved respirators in accordance with OSHA Standard 29

CFR1910.134.

Use only with adequate ventilation.

Do not take internally.

Keep out of the reach of children.

Keep container tightly closed and upright when not in use.

Wash hands thoroughly after handling, especially before eating or smoking.

Summary of content (5 pages)

PAGE 1
NewLook International, Inc. HydroHalt™ Safety Data Sheet Issue Date 22-May-15 Revised 22-May-15 Section 1 Product and Company Identification: Product Name: HydroHalt™ Product Use: Vapor Barrier Membrane Manufacturer’s Name: NewLook International, Inc. Manufacturer’s Address: 1525 South Gladiola Street Suite 8 Salt Lake City, UT 84104 Information Phone: NewLook International, Inc. 801.886.9495 or 877.763.9566 Emergency Contact: CHEMTEL 1.800.255.3924, Outside the USA +1.813.248.
PAGE 2
Other Hazards: Not Known Section 3 Composition/ Information on Ingredients: Chemical Name Asphalt CAS Number 8052-42-4 Weight 50 - 60% Inert Media 7732-18-5 20 – 40% Styrene Butadine Latex 9003-55-8 20 – 30% Diesel 68476-34-6 0 – 5% Sodium Hydroxide 1310-7-32 0.1 – 1% Ameno Ethynol 34375-28-5 0.01 – 0.1% Section 4 First Aid Measures: Precautionary Statements: Response Inhalation: Move to fresh air. Give artificial respiration, if not breathing.
PAGE 3
Handling and Storage: Precautions for Safe Handling: Avoid extreme temperatures, DO NOT FREEZE. Store in a cool, dry place with adequate ventilation. Storing temperature 40 -100°F (4 -37°C). Keep containers closed when not in use.
PAGE 4
Section 10 Stability & Reactivity: Stability: Stable Hazardous Polymerization: Will not occur Conditions to Avoid: Elevated temperatures Materials to Avoid: Oxidizing agents Hazardous Decomposition Products: Carbon Monoxide, Carbon Dioxide, Contact with strong acidic aqueous system can release solubilized barium Section 11 Toxicological Information: Routes of Entry: Inhalation and Ingestion Toxicity to Animals: Not Established Chronic Effects on Humans: Not Established Special Remarks on Toxicity: Unlike
PAGE 5
WARNING: This product contains substance(s), which are known to the State of California to cause cancer or reproductive harm. Contains trace amounts of arsenic from barium metaborate monohydrate. Section 16 Other Information: The SDS should be read before product disposal. Pass SDS information to all persons who could be exposed to the product. The SDS has been prepared according to OSHA hazard Communication Standard (29 CFR 1901.1200).