User Manual

5
INSTRUCTIONS
LED DISPLAY
at Plant Mode
at Human Mode
MAIN MENU FUNCTIONS
The Main Menu (8) funcons can be toggled through by using MENU. If the main menu is not brought
up, the green bar will remain blank, leaving the UP and DOWN buons to toggle between parameters
and Zoom Levels, respecvely.
ALARM PLANT LOG CALI ALTI 0C/0F ADV
Pressing MENU once will bring up the main menu, with an underlining ashing bar indicang the
current choice.
To select the funcon, press ENTER when it is underlined by the ashing bar. Note that aer 1 minute
if nothing is pressed, the Main Menu will disappear and the device will revert to the normal state.
HOLD HOME
Hold ENTER for 3 seconds to reset the unit back to Home Seng which has a default target zone of
800-1200 PPM. The Target Zone is the only seng that will be reverted back to Home Seng. All
other sengs will not be reset. If the unit is unplugged it will keep the plant seng previously selected
before power was removed.
On the next page is a table showing what main menu selecon is made by pressing MENU mulple
mes as well as their funcons. Note that the device will display “Done,” followed by the conrmed
selecon if selected correctly.
Note: LOW LED never turns ON in
Human Mode