User Manual

INSTRUCTIONS
www.Hydrofarm.com 2
GETTING STARTED
Congratulaons on the purchase of your new APCEM2. Our products are packaged and shipped
with the utmost care. In the unlikely event that your item is incorrect, incomplete, or unsasfactory,
please contact us and we will see to xing it immediately. Feel free to contact us with any quesons,
comments, or concerns at Hydrofarm.com.
• To ensure safety, please read this manual carefully before installation and follow the instructions
herein.
• Store this manual in a secure place for future reference
WARNING: CHOKING HAZARD - Accessories contain small parts
PACKAGE CONTENTS
• CO
2
monitoring unit
• Micro USB Cable for power x2
• AC adapter
• User manual
• Rope strap; screws
FEATURES AT A GLANCE
• CO
2
/temperature/RH monitor
• Trend chart with variable time span
selections
• 2-Channel low drift NDIR sensor
• Built-In plant types directory
• 3 color LEDs for easy-reading
• Foolproof “Hold Home” function
OPERATING INSTRUCTIONS
Inial Setup: When rst unboxing, plug in the unit to the included Micro USB (or one of your own) to
almost any cell phone charger or USB power source. If successfully connected, 3 things will happen
while boong up:
• 3 LEDs flash one by one
• Chart display shows the current software version & “Warm Up”
• Main display shows a countdown from 10
Once the countdown is complete, your product is ready to use. No inial setup or calibraon is
needed.
DEPLOY THE STAND
PLUG IN THE USB POWER CABLE
OR HANG ON THE WALL