User Guide

INSTRUCTIONS
2 www.Hydrofarm.com
IMPORTANT SAFETY PRECAUTIONS
Please read all safety informaon before using
this product.
1. Use fan only as described in this manual.
Other use is not recommended and may
cause re, electric shock or injury.
2. This fan is intended for household use only
and not for commercial or industrial use.
3. Be sure fan is mounted onto a secure
structure.
4. Unplug fan when moving it from one locaon
to another, before pung on or taking o
parts (such as the safety grill), and before
cleaning.
5. To protect against electric shock, do not
immerse unit, put plug or cord in water or
spray with liquids.
6. Do not use outdoors or in window. Rain may
create electrical hazard.
7. Do not place fan or parts near an open
ame, cooking or other heang appliance.
8. Do not operate without fan grill in place.
9. Avoid contact with moving parts. Never
insert ngers, pencils or any other object
through the guard when fan is running.
10. Close supervision is necessary when any
appliance is used by or near children.
11. The use of aachment not recommended by
manufacturer may be hazardous.
12. Do not operate fan with a damaged cord or
plug, or aer the fan malfuncons or has
been dropped or damaged in any manner.
Discard fan or return to an authorized service
facility for examinaon and/or repair.
13. Do not let cord hang over the edge of a table
or counter, or let it touch any hot surfaces.
14. Do not run cord under carpeng. Do not
cover cord with throw rugs, runners, or
similar coverings. Do not route cord under
furniture or appliances. Arrange cord away
from trac area, where it will not be tripped
over.
15. To disconnect, grip plug and pull from wall
outlet. Never yank cord.
16. This fan has a polarized plug (one blade is
wider than the other). To reduce the risk of
electric shock, this plug is intended to t in
a polarized outlet only one way. If the plug
does not t fully in the outlet, reverse the
plug. If it sll does not t, contact a qualied
electrician. DO NOT aempt to defeat this
safety feature.
17. This product employs an overload protecon
fuse. A blown fuse indicates an overload
or short-circuit situaon. If the fuse blows,
unplug the product from the outlet. Replace
the fuse as per the user servicing instrucons
below. Follow product marking for proper
fuse rang and check the product. If the
replacement fuse blows, a short-circuit
may be present and the product should
be discarded or returned to an authorized
service facility for examinaon and/or repair.
18. RISK OF FIRE: Do not replace power supply
plug—it contains a safety device (fuse) that
should not be removed. Discard product if
the plug is damaged.
WARNING: To reduce the risk of re or
electrical hazard, do not use this fan with any
solid state speed control device.
Unplug or disconnect this fan from the
power supply before servicing.
ASSEMBLY INSTRUCTIONS
1. Unscrew the plasc nut on the front of the
motor case by turning counterclockwise.
2. Mount the rear grill to the front of the motor
cover by matching 2 holes on the grill to the
2 round knobs on the cover. Push in rmly
unl the 2 knobs protrude through the 2
holes.
3. Tighten the rear grill with the nut, making
sure that the nut is screwed in far enough so
that the rear grill is ush with the outside of
the motor housing cylinder.
4. Put the fan blade onto the motor sha by
matching the slots of the blade. Tighten
the blade with the blade cap by turning it
counterclockwise.
5. Test fan by rotang with your hands. Make
sure there is no contact with the nut. The
fan blade should rotate freely. If it doesn’t,
remove the blade and repeat steps 3-5.
6. Mount front grill onto rear grill by using the
grill support band. Cover both front and rear