Use and Care Manual

ManualsBrandsHydroFarm ManualsGarden CenterABWP10 Black and White 100 in. x 10 Foot Heavy Duty Waterproof Poly Film

roduct Name: LINEAR LOW DENSITY POLYETHYLENE - rades designated by LL or LLP prefix

evision Date: 5 Feb 2012

age 5 f 10

______________________________________________________________________________________________________________________

NGINEERING

NGINEERING CONTROLS

CONTROLS

The level of protection and types of controls necessary will vary depending upon potential exposure conditions.

Control measures to consider:

Adequate ventilation should be provided so that exposure limits are not exceeded. SPECIAL

PRECAUTIONS: Should significant vapours/fumes be generated during thermal processing of this

product, it is recommended that work stations be monitored for the presence of thermal degradation

by-products which may evolve at elevated temperatures (for example, oxygenated components).

Processors of this product should assure that adequate ventilation or other controls are used to control

exposure. It is recommended that the current ACGIH-TLVs for thermal degradation by-products be

observed. Contact your local sales representative for further information. It is recommended that all

dust control equipment such as local exhaust ventilation and material transport systems involved in

handling of this product are designed and maintained to minimize dust generation and accumulation.

Ensure that dust-handling systems (such as exhaust ducts, dusts collectors, vessels, and processing

equipment) are designed to minimize the potential for dust ignition and prevent explosion propagation.

For example, use explosion relief vents, an explosion suppression system or inert equipment internals.

Additional examples of proper equipment include using only appropriately classified electrical equipment

and powered industrial trucks.

ERSONAL

ERSONAL PROTECTION

PROTECTION

Personal protective equipment selections vary based on potential exposure conditions such as applications,

handling practices, concentration and ventilation. Information on the selection of protective equipment for use

with this material, as provided below, is based upon intended, normal usage.

espiratory

espiratory Protection:

Protection:

Protection: If engineering controls do not maintain airborne contaminant concentrations at a level

which is adequate to protect worker health, an approved respirator may be appropriate. Respirator selection,

use, and maintenance must be in accordance with regulatory requirements, if applicable. Types of respirators

to be considered for this material include:

Particulate air-purifying respirator approved for dust or oil mist is recommended.

For high airborne concentrations, use an approved supplied-air respirator, operated in positive pressure mode.

Supplied air respirators with an escape bottle may be appropriate when oxygen levels are inadequate,

gas/vapour warning properties are poor, or if air purifying filter capacity/rating may be exceeded.

and

and Protection:

Protection:

Protection: Any specific glove information provided is based on published literature and glove

manufacturer data. Glove suitability and breakthrough time will differ depending on the specific use conditions.

Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use

conditions. Inspect and replace worn or damaged gloves. The types of gloves to be considered for this material

include:

If product is hot, thermally protective, chemical resistant gloves are recommended. If contact with

forearms is likely, wear gauntlet style gloves.

ye Protection:

Protection:

Protection: If contact is likely, safety glasses with side shields are recommended.

kin

kin and

and

and Body

Body

Body Protection:

Protection:

Protection: Any specific clothing information provided is based on published literature or

manufacturer data. The types of clothing to be considered for this material include:

If product is hot, thermally protective, chemical resistant apron and long sleeves are recommended.

pecific

pecific Hygiene

Hygiene

Hygiene Measures:

Measures:

Measures: Always observe good personal hygiene measures, such as washing after

handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective

equipment to remove contaminants. Discard contaminated clothing and footwear that cannot be cleaned.