Use and Care Manual

roduct Name: LINEAR LOW DENSITY POLYETHYLENE - rades designated by LL or LLP prefix
evision Date: 5 Feb 2012
age 4 f 10
______________________________________________________________________________________________________________________
ignition sources, such as electrical grounding and bonding, inert atmosphere or non-sparking tools. However,
bonding and grounds may not eliminate the hazard for static accumulation. Consult local applicable standards
for guidance. Refer to NFPA 654, Standard for the Prevention of Fire and Dust Explosions from the
Manufacturing, Processing, and Handling of Combustible Particulate Solids and EN 61241, Electrical Apparatus
for Use in the Presence of Combustible Dust for safe handling. Avoid elevated temperatures for prolonged
periods of time. Eliminate all ignition sources (no smoking, flares, sparks or flames in immediate area). Prevent
small spills and leakage to avoid slip hazard. DO NOT handle, store or open near an open flame, sources of
heat or sources of ignition. Protect material from direct sunlight. Care should be taken when storing and
handling this product. Apart from the specific nature of the polymer product, conditions such as humidity, sunlight
and temperature have an influence on the way the product behaves during storage and handling. Special
attention should be paid to avoid inappropriate stacking of palletised bags or other package units. Indeed,
polymer products may be dimensionally unstable under certain conditions. Avoid conditions generating heat
during transfer operations.
oading/Unloading
oading/Unloading
oading/Unloading
oading/Unloading Temperature:
Temperature:
Temperature:
Temperature: [mbient]
ransport
ransport
ransport
ransport Temperature:
Temperature:
Temperature:
Temperature: [mbient]
ransport
ransport
ransport
ransport Pressure:
Pressure:
Pressure:
Pressure: [mbient]
tatic
tatic
tatic
tatic Accumulator:
Accumulator:
Accumulator:
Accumulator: This material is a static accumulator.
TORAGE
TORAGE
TORAGE
TORAGE
The container choice, for example storage vessel, may effect static accumulation and dissipation. Store in a
cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames and high
temperatures. Do not store in open or unlabelled containers.
torage
torage
torage
torage Temperature:
Temperature:
Temperature:
Temperature: [mbient]
torage
torage
torage
torage Pressure:
Pressure:
Pressure:
Pressure: [mbient]
uitable
uitable
uitable
uitable Containers/Packing:
Containers/Packing:
Containers/Packing:
Containers/Packing: ulk Containers; opper Cars; ags; oxes; rums; ctatainer; ilos
uitable
uitable
uitable
uitable Materials
Materials
Materials
Materials and
and
and
and Coatings
Coatings
Coatings
Coatings (Chemical
(Chemical
(Chemical
(Chemical Compatibility):
Compatibility):
Compatibility):
Compatibility): luminium; olyethylene Bags
ECTION
ECTION
ECTION
ECTION XPOSURE
XPOSURE
XPOSURE
XPOSURE CONTROLS
CONTROLS
CONTROLS
CONTROLS /
/
/
/ PERSONAL
PERSONAL
PERSONAL
PERSONAL PROTECTION
PROTECTION
PROTECTION
PROTECTION
xposure
xposure
xposure
xposure limits/standards
limits/standards
limits/standards
limits/standards for
for
for
for materials
materials
materials
materials that
that
that
that can
can
can
can be
be
be
be formed
formed
formed
formed when
when
when
when handling
handling
handling
handling this
this
this
this product:
product:
product:
product: For dusty conditions,
ACGIH recommends for insoluble and poorly soluble particles not otherwise specified an 8-hour TWA of 10 mg/m3
(inhalable particles), 3 mg/m3 (respirable particles). Product may also contain varying levels of additives, such as slip
and antiblocking agents (talc or silica), antioxidants, stabilizers, and corrosion inhibitors. Certain grades may contain
cristobalite, a form of crystalline silica, as an additive that is encapsulated in the polymer. Inhaled crystalline silica in
an occupational environment is recognized as a known human carcinogen. However, the potential for release of silica to
the air when this polymer is handled has been assessed and the encapsulated silica within the polymer is not expected
to pose a health hazard when processed under normal conditions of use.
iological
iological
iological
iological limits
limits
limits
limits
o biological limits allocated.
NOTE: Limits/standards shown for guidance only. Follow applicable regulations.