Use and Care Manual

ManualsBrandsHydroFarm ManualsGarden CenterABWP10 Black and White 100 in. x 10 Foot Heavy Duty Waterproof Poly Film

roduct Name: LINEAR LOW DENSITY POLYETHYLENE - rades designated by LL or LLP prefix

evision Date: 5 Feb 2012

age 3 f 10

______________________________________________________________________________________________________________________

should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA).

Use water spray to cool fire exposed surfaces and to protect personnel.

nusual

nusual Fire

Fire

Fire Hazards:

Hazards:

Hazards: Explosion: Avoid generating dust; fine dust dispersed in air in sufficient concentration

and in the presence of an ignition source is a potential dust explosion hazard.

azardous

azardous Combustion

Combustion

Combustion Products:

Products:

Products: moke, Fume, ncomplete combustion products, xides of carbon, lammable

hydrocarbons

LAMMABILITY

LAMMABILITY PROPERTIES

PROPERTIES

lash

lash Point

Point

Point [ethod]:

[ethod]:

[ethod]: /A

lammable

lammable Limits

Limits

Limits (pproximate

(pproximate

(pproximate volume

volume

volume %

% in

in air):

air):

air): EL: /D EL: /D

utoignition

utoignition Temperature:

Temperature:

Temperature: /A

ECTION

ECTION CCIDENTAL

CCIDENTAL

CCIDENTAL RELEASE

RELEASE

RELEASE MEASURES

MEASURES

OTIFICATION

OTIFICATION PROCEDURES

PROCEDURES

In the event of a spill or accidental release, notify relevant authorities in accordance with all applicable

regulations.

ROTECTIVE

ROTECTIVE MEASURES

MEASURES

Avoid contact with spilled material. Dust Deposits should not be allowed to accumulate on surfaces, as these

may form an explosive mixture if they are released into the atmosphere in sufficient concentration. Avoid

dispersal of dust in the air (for example, clearing dust surfaces with compressed air). Prevent dust exposure to

ignition sources. For example, use non-sparking tools and prohibit smoking, flares, sparks or flames in

immediate area. See Section 5 for fire fighting information. See the Hazard Identification Section for

Significant Hazards. See Section 4 for First Aid Advice. See Section 8 for advice on the minimum

requirements for personal protective equipment. Additional protective measures may be necessary, depending

on the specific circumstances and/or the expert judgment of the emergency responders.

PILL

PILL MANAGEMENT

MANAGEMENT

and

and Spill:

Spill:

Spill: Spilled pellets present a slipping hazard on hard surfaces. Prevent dust cloud. Small Dry Spills:

With clean shovel, place material into clean, dry container and cover loosely; move containers from spill area.

ater

ater Spill:

Spill:

Spill: Stop leak if you can do so without risk. Confine the spill immediately with booms. Warn other

shipping. Skim from surface

Water spill and land spill recommendations are based on the most likely spill scenario for this material; however,

geographic conditions, wind, temperature, (and in the case of a water spill) wave and current direction and speed

may greatly influence the appropriate action to be taken. For this reason, local experts should be consulted.

Note: Local regulations may prescribe or limit action to be taken.

NVIRONMENTAL

NVIRONMENTAL PRECAUTIONS

PRECAUTIONS

Prevent entry into waterways, sewers, basements or confined areas. For Large Spills: Cover spill with plastic

sheet or tarpaulin to minimise spreading.

ECTION

ECTION ANDLING

ANDLING

ANDLING AND

AND

AND STORAGE

STORAGE

ANDLING

Minimize dust generation and accumulation. Routine housekeeping should be instituted to ensure that dusts do

not accumulate on surfaces. Dust from material can accumulate electrostatic charges due to friction from

transfer and mixing operations and cause an electrical spark (ignition source). Provide adequate precautions to