Dimensions Guide

LACEY 6030
DESIGNER COLLECTION
aCrylIC tub
• Acrylic models finished in 1/8” thick layer of deep lustrous acrylic
• Pre-wired pump on pump platform (standard pump location only)
• Integral E-Z level platform facilitates installation
• Micro mount reduces lip height by approximately 3/8” to 5/8”
• Micro mount requires increase in framing height by approximately 1-1/4”
29132 Avenue Paine. Valencia, CA, 91355
661.775.0686 | hydrosystem.com
All specications and options subject to change without notice please
contact a Hydro Systems representative for more information.
Certain options or altering the pump/blower location may cause
the pump/blower to extend beyond the tub decking. For cutout
dimensions wait for unit to arrive. All specications subject to change
without notice.
CODES AND COMPLIANCES
Massachusetts code File no: P1-0614-491
Page 2 of 2
aS ShOwn:
Whirlpool option
featureS ShOwn:
• Overflow location
• Standard jet location
alSO aVaIlable:
• Soaking tub only
• Thermal Air
• Combo
baCkSlOPe:
28 degrees
water CaPaCIty:
50 Gallons
weIght:
55 - 95 pounds depending on system
drOP-In CutOut InStall dImenSIOnS:
• (L)ength - 58”
• (W)idth - 28”
• Finished Height - 19-1/4”
3-wall InStall dImenSIOnS:
• (L)ength - 60”
• (W)idth - 30”
• Top of Ledger - 20-3/4”
InS ta lla tI On tI P S :
• When adding integral linear drain
p-trap location is now below waste
• Adding multiple systems/options may
require equipment to stick out from
tub deck or be installed remotely
*Tub must be set in mortar base*
9
42 4
60 30
28°
2.75
17.5
Pump
HYDRO SYSTEMS, INC.
29132 Avenue Paine, Valencia, CA 91355
661.775.0686, fax [phone], www.hydrosystem.com
Note: The information contained on
this drawing is the sole property of
Hydro Systems, Inc. Any
reproduction in part or as a whole
without the written permission of
Hydro Systems, Inc. is prohibited.
Title: Lacey 6030
Date:
Scale:
Material:
February 7, 2018
None
Rev:
Date:
Acrylic and Fiberglass, ¼" nominal thickness
15
3
20
18
1.75
Optional Equipment Dimensions
• Whirlpool Pump: 12"(H) x 16"(L)
• Thermal Air Blower: 5"(H) x 11"(L)
• Hydro Fusion: 7"(H) x 15.5"(L)
• Hydro Indulge: 11"(H) x 19"(L)