Installation Guide

HYDRO SYSTEMS SHOWER BASE
CARE AND MAINTENANCE INSTRUCTIONS
Soap residues and mineral deposits are the enemies of your shower base, particularly in areas where there is hard water. However, by cleaning
your HYDRO SYSTEMS shower base at regular intervals and using proper cleaning agents, you can help your shower base retain its original
sparkling look.
Your HYDRO SYSTEMS shower base is made from the highest quality materials available. With normal use, the HYDRO SYSTEMS shower
base will retain its beautiful finish with only minimal care. Normal cleaning is simple and easy. To maintain the exquisite new lo ok of your
shower base, just follow these simple steps:
 Normal cleaning is simple and easy. Just use warm water, a soft sponge and mild liquid detergent or non-abrasive cleaner to wipe the
surfaces clean, then rinse thoroughly.
 Regular use of a quality automobile wax will maintain the sparkling finish of your shower.
 NEVER USE ABRASIVE CLEANERS.
 Do not allow the surface to come in contact with products such as acetone (nail polish remover), nail polish, dry cleaning solution,
lacquer thinners, gasoline, pine oil, etc.
 Remove dust and dirt with a soft damp cloth.
 Clean grease, oil, paint and ink stains with isopropyl (rubbing) alcohol.
 Avoid using razor blades or other sharp instruments that might scratch the surface.
 Small scratches can be removed by applying a thin coat of automotive paste wax and buffing lightly with a clean cloth.
Keep the NEW look in your HYDRO SYSTEMS shower base by giving it suitable care.
HYDRO SYSTEMS SHOWER BASE LIMITED WARRANTY
WARRANTY COVERAGE: This limited warranty is extended to this first user or the original retail purchaser for a period of sixty (60) months from the date
of purchase, and is not enforceable by any other party. HYDRO SYSTEMS warrants that the units be free from defects in workmanship and/or materials. This
limited warranty does not include accessories, not made by HYDRO SYSTEMS. HYDRO SYSTEMS does not assume any liability for the finish or the wearing
quality on any plated product. No dealer or other person has any authority to make any warranties or representations concerning HYDRO SYSTEMS, INC. or
its products. Accordingly, HYDRO SYSTEMS is not responsible for any such warranties or representations.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. NO WARRANTY OF
MERCHANTABILITY, FITNESS, NOR OTHER WARRANTY (WHETHER EXPRESS, IMPLIED OR STATUTORY), IS MADE BY HYDRO SYSTEMS.
EXCEPT THAT IT WARRANTS THE GOODS TO BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP IN NORMAL USE AND
SERVICE AS DESCRIBED ON THE FACE HEREOF.
WARRANTY OBLIGATIONS OF HYDRO SYSTEMS: Should a defect in workmanship and/or material in any item covered by this warranty become evident
during the term of the warranty, then upon the consumer following the procedures set fourth below. HYDRO SYSTEMS will, at its option, repair or replace
such item at its own cost or expense. HYDRO SYSTEMS is not, however, responsible under this warranty for any cost of shipping or transportation of the
equipment or parts thereof to or from the Service Department. Also, HYDRO SYSTEMS is not liable for any loss of time, inconvenience, incidental expenses
such as telephone calls, labor or material charges incurred in connection with the removal or replacement of the equipment, of any other incidental or
consequential damages, unless otherwise prohibited by applicable State Law.
Procedures to be followed to obtain Warranty Service:
1. Upon discovery of a defect or malfunction, notify supplier/installer and HYDRO SYSTEMS Technical Support Department, 29132 Avenue Paine,
Valencia, CA 91355, Tel: [phone], within ten (10) days and include a description of the malfunction or defect, the date the unit was purchased
and installed, the name and address of the seller and installer, and the name and address, and residence and business telephone numbers of the person
sending the notice together with information as to when the unit can be inspected.
2. Upon inspection HYDRO SYSTEMS, at its option, will repair or replace any defective unit. If repairs cannot be made on the premises, HYDRO
SYSTEMS, at its option, will repair or replace at the factory. However, the cost of removal and/or installation of the replacement unit and the cost of
transportation to and from HYDRO SYSTEMS are not covered. All parts, labor and material necessary to repair the system or bathtub are covered
except parts excluded elsewhere in this warranty.
EXCLUSION – THE WARRANTY DOES NOT COVER:
1. Any items manufactured by other companies and installed by HYDRO SYSTEMS. Such items may carry warranties offered by the manufacturers
of the original items.
2. Problems resulting from failure to comply with installation instructions, drawings or improper installation.
3. Problems resulting from abuse, misuse, negligence or accident by any party other than HYDRO SYSTEMS, such as, but not limited to, damage to
parts caused by installers.
4. Problems resulting in whole or part from alteration or modification of these products by any party.
5. Metal failures due to corrosion.
THIS WARRANTY IS PROVIDED TO YOU AS PART OF YOUR PURCHASE ORDER.
IT GIVES YOU SPECIFIC LEGAL RIGHTS; YOU SHOULD KEEP IT IN A SAFE PLACE WITH YOUR PURCHASE RECEIPT.
~over~