Manual

5
370 Encinal Street, Suite 150
Santa Cruz, Ca 95060
P: 888-426-5644 / F: 831-336-9840
www.hydrologicsystems.com
Determine the most prac cal under-the-sink loca on for placement of the
EcoSpring
TM
system. Ensure that the loca on allows adequate access for
cartridge re placement.
1. Place the system in the selected loca on.
2. Place the rubber seal (1) fl ush against the base of the faucet.
3. Insert faucet base assembly down through the sink hole.
4. From underneath the sink, push the 1/4” black drain tubing a ached to the
system onto the 1/4” fi  ng located on the faucet base.
5. Locate the extra piece of 3/8” white tubing and push one end onto the larger
3/8” fi  ng located on the faucet base.
6. Slide white plas c spacer (2) open-end-up onto the threaded faucet stem.
7. Loosely thread the 3/8" washer (3) and moun ng lock nut (4) onto the
threaded stem.
8. Thread faucet quick-connect adapter (5) on to threads of faucet stem. NOTE:
This connec on should be hand- ghtened only. Push end of 3/8" blue tubing
(located on the system) onto 3/8" adapter.
9. Posi on the faucet to the desired handle orienta on. Slip the (6) slo ed
washer between the white plas c spacer and the sink. Securely hand  ghten
the moun ng nut.
10. Firmly insert spout assembly into the top hole of faucet body (approximately
1/4"). You may swivel the faucet le or right.
Note: We have a large selec on of designer faucets with a variety of fi nishes,
colors and styles available. Please visit www.eco-spring.com for details.
Push Handle Airgap Faucet
(1) Rubber seal
(3) 3/8" washer
(4) Moun ng
lock nut
(5) Quick connect
adapter
(6) Slo ed washer
(2) Plas c spacer