Full Product Manual

IMPORTANT PRODUCT INFORMATION
READ IMMEDIATELY
SAFETY FIRST!
Failure to observe the following safety warnings may result in serious injury or death. Use all Hydro Crunch™
products only as directed. Failure to observe these safety warnings will result in a waiver of any and all liability on the
part of Hydro Crunch™ its manufacturer, and resellers, and will void all warranties to the extent permitted by law.
WARNINGS AND INSTRUCTIONS
FOR USE:
 Disconnect power before re-lamping.
 When re-lamping, make sure lamp has time to cool before touching.
 Make sure power cord is connected properly.
 DO NOT hang ballast by power cord or lamp cord.
 DO NOT make contact with the interior of the socket while the power is on.
 DO NOT plug or unplug a lamp cord while the ballast is turned on.
 ALWAYS unplug the ballast from the power source before connecting or disconnecting any lighting device to ballast,
moving ballast, or otherwise touching or handling ballast or its components.
 DO NOT use with generators. Warranty will be voided.
 NEVER stand beneath the ballast.
 NEVER put hands or any other objects in the interior of the ballast.
 DO NOT operate this or any lighting system in wet areas.
 NEVER get the ballast wet or allow it to come into contact with water or any other liquids.
 NEVER drop, shake or jostle the ballast.
 NEVER attempt to insulate or otherwise cover the ballast, as it releases a great deal of heat and may cause a fire or
other damage. Ballasts should always have plenty of room to breathe and good ventilation around them.
 DO NOT plug this system into a supply voltage other than what is instructed on your fixture.
 DO NOT attempt open or rewire the components of the light system. It will void the warranty and may cause serious
injury or death.
 NEVER attempt to rewire or alter any internal or external mechanisms or components on the ballast. This includes
trying to cut and/or rewire the cords.
 If any part of the lamp is damaged, replace lamp immediately.
 Disconnect the unit from a power source before replacing lamps or any other parts.
 When replacing lamps, make sure the lamp has had time to cool before touching.
 Make sure power cord and lamp cord are connected securely to the unit.
 These products operate at very high temperatures. Keep away from children.
 Glass is required for reflectors using metal halide (MH) lamps for UL listing to apply. Glass is not required for high
pressure sodium (HPS) lamps to be UL listed.
 Always use a three prong timer rated for 15 amps or more with light systems.
 Do not operate lamps that are a different wattage than the ballast specifies.
 Read all instructions completely before attempting to power on unit. Failure to follow
the warnings and instructions for use may result in serious injury or death, for which Hydro Crunch™'s manufacturer
and resellers expressly disclaim any and all liability.