Instruction Manual Double Ended Cool Tube Hood Reflector
Parts List 3 –Middle reflector 4 –End reflectors 1 –Cool Tube 4 –Corner steel plates 30–M4 nuts 46–M4*8 Wing screws Reflector Assembly
How to Assemble 1. Use 28 sets wing screws and 12 nuts to attach the middle aluminum and side aluminum. 2. Use rest 18 sets wing screws and nuts to connect the middle steel plates to the side aluminum reflector. 3. Finish the assembly and hang the reflector with rope hangers. Lamp Installation 1. Open up both the cover of lamp holders. 2. Install the lamp after the lamp is locked by latch. 3. Once lamp is positioned correctly close the cover of the lamp holders to secure and lock the lamp in place. 4.
1 Year Limited Warranty Service If the product will not work after you have read the troubleshooting guide and practiced the troubleshooting options, you are advised to return the Hydro Crunch™ light system to the retailer you purchased it from. The dealer will be able to examine the light and test its components. If they are not able to repair the light, they will return it to us for examination and repair/replacement. Do not attempt to repair any product on your own, as serious injury or death may result.
