Manualshelf

Instructions / Assembly

ManualsBrandsHydro Crunch ManualsGarden Center18 in. Double Ended DE Basic Wing Grow Light Reflector with Socket and Cord for up to 1000-Watt
123
REFLECTOR ASSEMBLY
PARTS LIST:
6–M4 nuts
6–M4*8 screws
2 –Aluminum Wing
1 –Support frame with socket kit
LAMP INSTALLATON:
1. Open up both the cover of lamp holders.
2. Install the lamp after the lamp is locked by latch.
3. Once lamp is positioned correctly close the cover of the lamp holders to secure and lock the
lamp in place.
Installing the double ended lamp within the lamp holders shown following photos.
Please note: During installation try to minimize excessive handling of the lamp to minimize
fingerprints and oils left on the lamp. If the lamp needs cleaning use a soft dry cotton cloth to
wipe of finger prints or oils.
ATTENTION：Please make sure the wire of the lamp is straight when you install the
lamp. If not, the lamp will not connect securely with the socket.