Full Product Manual

5. Safety Recommendations and Warnings
Warning! Carefully read the warnings below before using or working with the fixture!
• Always adhere to the local rules and regulations when installing or using the fixture.
• Do not use the fixture when either the lamp or the power cord is damaged. Replace the power cord only with
original certified cords.
• Do not expose the fixture to: Condensing humidity, heavy mist, fog or direct spray, temperatures outside the
specified range, dust and contamination.
• Always disconnect the fixture from the mains before performing any task on it.
• Always allow for a cool down period of at least 30 minutes before touching the lamp or reflector. Touching the
lamp or the reflector when the lamp is lit or immediately afterwards will result in severe burns!
• Do not use the fixture near flammable, explosive or reactive substances. The lamp and the reflector of the
fixture become very hot during use.
• Do not use sulfur vaporizers or water misters close to your fixture. Sulfur and calcium deposits on your reflector
will decrease its efficiency.
• Never touch the lamp or the inside of the reflector with bare hands as this will cause damage to the lamp or
reflector.
6. Installing the Fixture
Warning! Avoid coiled cords. Coiled cords may lead to electromagnetic interference.
Warning! Always install the lamp before connecting the fixture to the mains.
Warning! Ensure the local cabling can support the voltage and current requirements of the fixture.
•Install the lamp in the fixture
7. Fixture use
Warning! Never use the fixture without a lamp or reflector!
8. Inspection, Maintenance and Repair
Warning! Disconnect the fixture from mains before performing any maintenance or repairs.
Warning! Do not open or disassemble the fixture, it contains no serviceable parts inside. Opening the fixture can be
dangerous and will void the warranty.
Warning! Always allow for a cool down period of at least 30 minutes before touching the lamp or reflector.
Caution! Do not clean the fixture with detergents, abrasives or other aggressive substances.