Warranty

Caution! Do not touch the inside of the reflector and do not use water, abrasives or detergents to clean it. This will
damage the reflective surface.
Caution! Wait 20 minutes before activating the fixture after maintenance work has been conducted.
• Regularly check the fixture for dust or dirt buildup. Clean if necessary.
• Contamination may cause overheating and decreased performance.
• Clean the inside of the reflector only with a soft, dry cloth.
• Clean the electric ballast and the outside of the fixture using a dry or damp cloth.
• Check the lamp monthly for discolorations or black markings. Always replace a damaged lamp.
• Regularly check the wiring of the fixture to ensure it is undamaged.
8.1. Placement and Replacement of the Lamp
Caution! Do not touch the lamp with bare hands as this will damage the lamp.
Always use a fabric glove to handle the lamp.
Note: The lamp must be replaced every year or after 5000 lighting hours, whichever one comes first.
• Hold the lamp with a fabric glove to prevent it from falling. Use a protective glove if the lamp is damaged.
• Open the cap of lamp holders (A).
• Carefully take the lamp out.
• Straightening the wires of the lamp (B).
A
B
C
D