Warranty Guide

BULB INFORMATION:

If there are bulbs that don’t fire, make sure that the lamp is properly inserted and seated in the

socket. If that does not work try swapping the bulbs around for others that are working. This will

help determine if it is the bulbs or the fixture that is defective.

Hydro Crunch™ T5 FLUORESCENT SETUP

1. Remove the T5 system from its box along with all additional parts.

2. Hang the unit to a secure surface using the wire cable hangers provided (optional light

hanger systems can be purchased separately). Never stand underneath the unit.

3. Install lamps (examine the label to determine the correct lamp) into the system. Insert

both ends of the lamp into the lamp sockets and rotate the lamp 90 ° in either direction.

You will feel a small click when it is properly seated.

4. Hydro Crunch™ T5 units can be daisy chained

together. Do not exceed 7.5 amps on any fixtures

chained together. Do not daisy chain more fixtures

than what is recommended. Chaining more fixtures

together than recommended will void the warranty.

Always unplug T5 systems from the power source prior

to moving, connecting, chaining, disconnecting, or

otherwise handling lighting systems.

5. Finally, connect T5 system to a power source.

Daisy Chain Feature

Fixture Type

Max # Chained

T522

T524

T528

T544

T546

T548