Full Product Manual

1. Package Contents
2. Instructions
3. Layouts (Growth and Bloom)
5. Remote Control System (Optional Accessory)
6. Specifications
Power Cord
Hanging Kit
7. Support
Contents
1. Package Contents
The package contains:
2. Instructions
Operation - The Hydro Crunch Grow Series LED Hydro Grow Light Fixture is a technologically
advance system but is very easy to use. Simply ensure that the switch on the unit is off, plug in the
supplied power cable and switch the unit on. It is that easy!
Timer - If you wish to add a timer to the system, simply purchase a mechanical or digital timer (rated
at 10A) of your choice and plug between the fixture and the power socket. The units feature soft
switching technology to help extend the LED lifespan in the event of minor surges or short circuit. This
also ensures that manual switching of power to the light will not affect its longevity (e.g. manual
timers).
Hanging - To hang the fixture, simply clip on the supplied hanging kit and mount with suitable anchor
hardware relevant to the material you are hanging from. You must ensure that the vents on the sides
and top of the light are unobstructed (10cm gap required for both top and sides). This will allow
adequate ventilation to ensure that the fixture does not overheat.
Remote Control System (Optional Accessory) – All LED Hydro Grow Light Models feature remote-
control system inner, including a control module, an aerial and an optional remote-controller. Effective
distance of controller is 100 meters (328 feet). Further information can be found in section 5.
4. EpiStar LED Chip
LED Grow Light Fixture
Instruction Manual