Product Manual

2
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
product before using. The owner and operator of this equipment shall have an understanding of this product and
safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of
this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the
operator's native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of
this product, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any equipment that
appears damaged in any way, or operates abnormally shall be removed from service immediately. If the product
has been or suspected to have been subjected to a shock load (a load applied suddenly, unexpectedly upon it),
immediately discontinue use until the equipment has been checked by a factory authorized service center (contact
distributor or manufacturer for list of authorized service centers). It is recommended that an annual inspection be
done by qualied personnel. Labels and Operator's Manuals are available from manufacturer.
PRODUCT DESCRIPTION
The HydrauLink™ is a combination hydraulic top link/shock absorber for tractors using a three-point connection
system. It allows for control and adjustment of many common tractor mounted implements. The HydrauLink™ is
self contained and requires no external hydraulic source.
SPECIFICATIONS
Feature CAT I CAT II
Bore and Stroke 1-1/2" x 6" 2" x 6"
Weight Capacity 5300 lbs. 9400 lbs.
Chrome Plated Shaft Diameter 1" 1-1/8"
Adjustment Range 20-1/8" to 24-1/8" 24-5/8" to 28-5/8"
Attachment Pin Hole Size 3/4" 1"
• Valve block design with machined 9/16" ORB ports
• Needle valve integration
• Self-aligning ball joints
• 3000 psi maximum operating pressure
• Piston seal
• Cup type shaft seal
• Internal dust wiper
PREPARATION
1. Attach to the Tractor. Locate the end of the HydrauLink™ that has a nut with a large screw and attach this to
the tractor with a pin thru the ball socket. Choose the point to connect on your tractor that will allow the Hy-
drauLink™ to be as level as possible when using your implement.
Adjustable Threaded
end (attaches to tractor)
Piston end
(attaches to
implement)
Close Cylinder Valve
Open Cylinder Valve