Product Manual

hydraulink rev 022011

Operating Instructions

Read this manual and follow all the Safety Rules and Operating Instructions before using the product.

TRI TRAC INNOVATIONS

P.O. BOX 677

ROGERS, AR 72757

Tel: 479-254-0873

http://www.hydraulink.net

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

U.S. Patent Pending

61/180,928

! WARNING

The owner and/or operator shall have an understanding of the product,

its operating characteristics and safety instructions before operation.

For your safety, read, understand, and follow the information provided

with and on this product before using. If the operator is not uent

in English, the product and safety instructions shall be read to the

operator in their native language.

The HydrauLink™

CAT I & II

PAGE 1
Operating Instructions The HydrauLink™ CAT I & II U.S. Patent Pending 61/180,928 ! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. ! WARNING The owner and/or operator shall have an understanding of the product, its operating characteristics and safety instructions before operation.
PAGE 2
SAFETY AND GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this product before using. The owner and operator of this equipment shall have an understanding of this product and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge.
PAGE 3
2. Attach to the Implement. Open the valve all the way (counter-clockwise). Firmly grip the HydrauLink™ and pull out the cylinder rod (chrome part) so that about 1-1/2" of chrome is explosed. Close the valve finger tight only. Grasp the HydrauLink™ and rotate (unscrew) to lengthen from the end attached to the tractor until the cylinder ball socket will attach with a pin to your implement. Do not unscrew more than 4-1/2".
PAGE 4
REPLACEMENT PARTS 2 3 Item Part No.