Spec Sheet

Tel: [phone] / Toll Free: 844.218.8477
Fax: [phone]
Tel: [phone] / Toll Free: 888.275.4538
Fax: [phone] / toll free: 877.453.8832
[e-mail] / mvpgroupcorp.com
06/2017
Hydra - Kool is a registered trademark of MVP Group Corp.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
NOTE
These cases are engineered to operate in locations not exceeding 75°F
and 55% R.H. These cases are designed to operate using R404a refrigerant.
Alternate refrigerants available by special order. O.A. length includes (2) ends
at 1-7/8” each. Ventilation grills at front and back cannot be blocked. B.T.U.’s
are calculated at 14°F (evaporator) and 90°F (ambient). Floor drain must be
provided with an expansion value and a liquid solenoid for pump down
cycle. Cases must be hard wired – no plugs.
STANDARD FEATURES
Silver colored PVC coated steel front panel
CFC free injected foam insulation
PVC coated steel gray interior
Black steel kick plate
Foamed polystyrene black end panels
Height adjustable shelves can be tilted
Product stops on all shelves
Temperature and defrost regulated by a digital controller
Levelling feet
OPTIONAL FEATURES
Other colors available
Stainless steel exterior and / or interior
Additional shelves
Price tag molding
Product dividers
Joining Kit
Partition
WARRANTY
One year parts and labor with an additional four years on
the compressor (part only)
HIGH VOLUME GRAB-N-GO CASE
FOR REMOTE CONDENSING UNIT
REMOTE
Model
Number of
Doors
O.A.
Length
(inches)
Volume
FT
3
Total Amps BTUS
Weight lbs
Crate Size (inches)
No Crate
With
Crate
L” W” H”
KGV-MD-2-R 2 x 23-1/2 51.5 37.63 1.43 3345 555 763 54 37 85
KGV-MD-3-R 3 x 23-1/2 75.4 56.37 2.19 4430 773 1040 78 36 85
KGV-MD-4-R 4 x 23-1/2 99.4 75.26 2.86 6811 1110 1526 104 36 85
KGV-MD-5-R 5 x 23-1/2 123.2 94 3.62 7795 1328 1803 126 36 85
KGV-MD-6-R 6 x 23-1/2 147 112.73 4.38 9397 1546 3052 150 36 85
* Note for other lengths please contact MVP