Spec Sheet
Tel: 786.600.4687 / Toll Free: 844.218.8477
Fax: 786.661.4100
Tel: 514.737.9701 / Toll Free: 888.275.4538
Fax: 514.342.3854 / toll free: 877.453.8832
sales@mvpgroupcorp.com / mvpgroupcorp.com
06/2017
Hydra - Kool is a registered trademark of MVP Group Corp.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
STANDARD FEATURES
CFC free injected foam insulation
Stainless steel interior
Stainless steel rear work bench
Silver colored PVC coated steel front panel
Black steel kick plate
Foamed polystyrene black end panels
Tempered tilt-foward front glass
Removable rear tempered glass sliding doors
LED lighting in canopy
Temperature and defrost regulated by a digital controller
Removable condensate evaporating pan for easy cleaning on
self contained units
Slide out condensing unit on self-contained units
Digital thermometer
Levelling feet
OPTIONAL FEATURES
Stainless steel exterior
Lift up front glass
Other colors available
Joining Kit
Partition
Condensate evaporating pan for remote cases
White epoxy bi-level wire racks; 2 or 3 level step sham
Scale stand with receptacle
Cutting board
Knife Supprt
Casters add 4-3/8” to height
Stainless steel legs are adjustable from 5-1/8” to 7-5/8”
WARRANTY
One year parts and labor with an additional four years on
the compressor (part only)
NOTE
These cases are engineered to operate in locations not
exceeding 75°F and 55% R.H. These cases are designed to operate
using R404a refrigerant. Alternate refrigerants available by special
order. O.A. length includes (2) ends at 1-1/2” each. Ventilation grills
at front and back cannot be blocked. B.T.U.’s are calculated at 14°F
(evaporator) and 90°F (ambient). Remote cases are
provided with an expansion valve and a liquid solenoid for pump down
cycle. On remote cases, if no oor drain is provided, a condensate
evaporating pan must be ordered and 3.3 amps added to the amp load.
Remote cases must be hard wired – no plugs.
Standard Mounting Optional Mounting
Levelling Feet Adjustable Legs
CURVED GLASS DELI CASE
DESIGNED FOR FRESH MEAT
SELF CONTAINED
Model
O.A.
Length
(inches)
Volume
FT
3
Electrical 115 Volts
NEMA
115 V
Plug
Weight lbs
Crate Size (inches)
Front
Compressor LIGHTS
Fans
HTRS
EVAP
PAN
Total
Amps
No
Crate
With
Crate
L” W” H”
H.P F.L.A
KFM-CG-40-S 40.4 12.35 3/8 8.4 0.95 3.3 12.68 5-15P 333 494 48 44 42
KFM-CG-50-S 52.2 16.27 1/2 9.6 0.96 3.3 13.89 5-15P 377 560 59 44 42
KFM-CG-60-S 60 18.88 1/2 9.6 1.08 3.3 14.01 5-15P 427 626 67 44 42
KFM-CG-80-S 77.5 24.70 5/8 8.9 1.68 3.3 13.91 5-15P 531 794 85 44 42
KFM-CG-100-S 101.2 32.54 3/4 16 1.81 3.3 21.14 N/A 658 937 109 44 42
KFM-CG-120-S 117 37.76 3/4 16 2.06 3.3 21.39 N/A 785 1160 124 44 42
REMOTE
Model
O.A.
Length
(inches)
115 Volts
Total Amps
B.T.U
Weight lbs
No
Crate
With
Crate
KFM-CG-40-R 40.4 0.5 2548 278 439
KFM-CG-50-R 52.2 0.51 3015 322 505
KFM-CG-60-R 60 0.63 3159 373 571
KFM-CG-80-R 77.5 0.78 4345 498 761
KFM-CG-100-R 101.2 0.91 5112 604 882
KFM-CG-120-R 117 1.16 5472 721 1093
Casters