Installation Manual Instruction Manual

Installation Manual
© Hydra-Flex Inc 2011
- 7 -
Pump Assembly – need to be within 6’ of furthest Aqua-Lab
panel
1. Drill 3/8” holes in wall for bottom slots (20” on center pump
nose down, 3.5” on center pump nose sidewise – Dual
stand)
2. Insert concrete anchors, set pump on bolts and tighten
down.
3. Hold pump stand in place, drill top holes, insert anchors
and tighten
Motor Starter
o Mount to the wall with 4 appropriate anchors
Use these slots if mounting
pump nose down