Product Manual

3
Receiving and Transporting
Initial Inspection: Regardless of the source, immediately inspect the Hydraulic Power Pack for damage or any
missing components. See the “Machine Component Identification” section of this manual for a diagram of the
Hydraulic Power Pack and its components.
Your purchase will result in delivery through one of the following sources:
Truck Delivery Note: Shipping damage claims are not covered by Hydra Buddy™
warranty.
For any shipping damage, make sure the delivery driver acknowledges the
damage and notes the damage on the shipping documents.
Please contact Hydra Buddy™ Customer Service to report the damage so a
claim can be filed with the carrier on your behalf.
Some assembly may be required with truck delivery. This is detailed in the
“Assembly” section.
Store Purchase
Some assembly may be required. This is detailed in the “Operation: Pre-Start
Checklist” section.
From a Dealer Your unit should have been delivered completely assembled and ready to
run.
Read the “Operation: Pre-Start Checklist” section and verify that the unit has
been properly ‘prepped’ before initial use.
Transporting: The Hydraulic Power Pack should be secured to prevent rolling and tipping when transporting
in a vehicle or trailer.
Unpacking
Fastener Inspection: Verify quantities of the fasteners found in the manual bag for assembly.
Rubber Foot
Qty 4
5/16” x 1” Bolt
Qty 4
5/16”Nyloc Nut
Qty 4