Product Manual

19
Maintenance & Repair (Continued)
5. Hydraulic oil & filter change:
Hydra Buddy™ recommends an oil change every 100 hours of operation. Add 10 wt. AW32, ASLE H-150, or
ISO 32 oil to 1” full mark on the dipstick.
WARNING
Never run the Hydraulic Power Pack unless the hydraulic oil tank is at the full mark on the dipstick.
Repairs and Parts
Repairs. Major service, including the installation or replacement of parts, should be performed only by a
qualified technician.
Replacement parts. If a part needs replacement, only use factory approved repair parts. Replacement parts
from secondary suppliers (not original Hydra Buddy™ replacement parts) can lead to product damage and/or
personal injury, and will void the warranty. Also, replacement parts that do not meet specifications may result
in a safety hazard or poor operation of the Hydraulic Power Pack. Obtain factory-approved parts from Hydra
Buddy™ Customer Service at 1-800-822-0295.
Maintenance Schedule
Type of Maintenance Frequency
Check Hydraulic Oil Level Daily
Check Hydraulic Oil is Clean Daily
Change Hydraulic Oil Annually/100 hrs.
Clean Magnetic Drain Plug Each Hydraulic Oil Change
Replace Return Line Filter First 50 hrs. / 250 hrs.
Check Coupling Assembly 250 hrs.