Product Manual
9
Operation
Pre-Start Checklist
CAUTION: No Oil in Engine Crankcase
Add the correct amount of oil to engine crankcase or engine will be damaged beyond repair.
CAUTION: No Hydraulic Oil in Tank
Add the correct amount of hydraulic oil to the reservoir before use.
1. Install rubber feet to the bottom of the tank assembly
2. Check / add engine crankcase oil
3. Check / add hydraulic oil
4. Prime hydraulic pump (with engine off)
5. Inspect hydraulic system (with engine off)
6. Check Implement Hydraulic System
7. Fill engine gasoline tank (upper tank)
8. Inspect fuel system for leaks (with engine off)
These procedures are discussed in detail below:
1. Install rubber feet to the bottom of the tank assembly
Align the holes in the rubber feet with the holes in the hydraulic tank brackets.
Insert the supplied 5/16” x 1” bolts through the holes in the feet up into the hydraulic tank brackets.
Secure the feet and bolts using the supplied 5/16” nyloc nuts.
5/16” Nyloc Nut
Rubber Feet
5/16” X 1 Bolt