Product Manual

12
Starting and Warm-up Before Use
1. Place the Hydraulic valve handle in the neutral (center) position.
2. Start the engine per the manufacturer’s instructions.
3. Once the engine has started, move the throttle down to the mid-range position and allow the
engine to run for ten (10) minutes to warm engine and hydraulic oil.
4. Turn engine off.
5. Clear line pressure by moving the Hydraulic Power Pack valve to the forward position for
four (4) or five (5) seconds, then to the reverse position for four (4) or five (5) seconds to
relieve pressure.
6. Attach implement’s hydraulic hoses.
Your Hydraulic Power Pack is now ready for attachment to an implement.
WARNING: Personal Protective Equipment
Never use the Hydraulic Power Pack or any powered equipment without proper protective equipment, such as
eye protection.