Display Unit HDA 5500 Operator Manual Release 4.0x date:10.05.
3.2.
.2.2 Connection diagramm of the HDA 5500 3.2.2.1 Connection of the supply voltage 12..32 V DC HDA 5500 – X – X – DC 85..265 V AC 50/60 Hz HDA 5500 – X – X – AC 3.2.2.
3.2.2.3 Connection of the sensor with current signal (IN2 and IN3 only for HDA 5500 – 1 – X – XX – XXX) IN 1 IN 3 IN 2 I I I AGND AGND AGND 3.2.2.
3.2.2.5 Analog output for current signal (for all devices) Iout = Analog. Out RLmax = AGND 3.2.2.6 Analog output for voltage signal (for all devices) Analog.
3.2.2.7 Seriel interface (all devices) Settings: 19200 Baud – 8 Data bits – 1 Startbit – 1 Stopbit – no Parity Bit and no handshake. TXD RXD DGND control device 3.2.2.8 Digital Inputs – Frequency / counter function (HDA 5500 – 2 – X – XX – XXX) description: Freq., Start, Stop and Clear, are 4 digital Inputs. All those signals are active triggered to raising edge. The maximum amplitude is 24 VDC. Freq.
3.2.2.8 Pt100 Input (HDA 5500 – 3 – X – XX – XXX) Pt100 3.2.2.9 Connection of the relais (SP1 and SP2 for HDA 5500 –X– 1 – XX – XXX and HDA 5500 –X– 2 – XX – XXX SP3 and SP4 for HDA 5500 –X– 2 – XX – XXX) SP1 N/C SP4 Öf. SP4 Sc. SP3 Öf. SP3 Sc. SP2 Öf. SP2 Sc.
4.
7.
display Setting Switching mode SP 2 (SM 2) Setting range Presetting SP/ Win SP HDA 5500 - X - 1 - XX - XXX HDA 5500 - X - 2 - XX - XXX ON/ OFF ON HDA 5500 - X - 1 - XX - XXX HDA 5500 - X - 2 - XX - XXX 0.00..99.99s 0 HDA 5500 - X - 1 - XX - XXX HDA 5500 - X - 2 - XX - XXX 0.00..99.99s 0 HDA 5500 - X - 1 - XX - XXX HDA 5500 - X - 2 - XX - XXX Sen1 Sen2 Sen.
display Setting Switch Point source SP 4 (SS 4) Setting range Presetting Sen1 Sen2 Sen.1 Sensor 1 is activated to SP 4 device HDA 5500 - 1 - 2 - XX - XXX HDA 5500 - 2 - 2 - XX - XXX HDA 5500 - 3 - 2 - XX - XXX Sensor 2 is activated to SP 4 Sensor 3 is activated to SP 4 Sen3 Diff HDA 5500 - 1 - 2 - XX - XXX Difference value (Sensor 1 – Sensor 2) is activated to SP 4 Switching mode SP 4 (SM 4) SP/ Win SP HDA 5500 - X - 2 - XX - XXX ON/ OFF ON HDA 5500 - X - 2 - XX - XXX 0.00..99.
display Setting range Setting current value Sensor 3 Presetting device Sen.3 Min.3 Top.3 HDA 5500 - 1 - X - XX - XXX Diff Min.d Top.d HDA 5500 - 1 - X - XX - XXX HDA 5500 - 2 - X - XX - XXX HDA 5500 - 3 - X - XX - XXX Minimum value Sensor 3 maximum value Sensor 3 Difference value (Sensor 1 – Sensor 2) Minimmum difference value (Sensor 1 - Sensor 2) Maximum difference value (Sensor 1 Sensor 2) or SP 1 or SP 2 SP.1 SP.
display Setting Decimal places Sensor 1 Setting range Presetting device 0..0.000 0.0 For all devices -999..9899 0.0 For all devices -899..9999 10.0 For all devices On Off On For all devices 5V 10V mA.r. mA.S. 10V HDA 5500 - 1 - X - XX - XXX 0..0.000 0.0 HDA 5500 - 1 - X - XX - XXX HDA 5500 - 3 - X - XX - XXX -999..9899 0.0 HDA 5500 - 1 - X - XX - XXX HDA 5500 - 3 - X - XX - XXX -899..9999 10.
display Setting Lower display range (Low Range) Sensor 2 Setting range Presetting device -999..9899 0.0 HDA 5500 - 1 - X - XX - XXX -899..9999 10.0 HDA 5500 - 1 - X - XX - XXX On Off On HDA 5500 - 1 - X - XX - XXX 0..0.000 0.0 HDA 5500 - 2 - X - XX - XXX 0..9999 0.
display Setting Assign the analog output to the sensor Assign sensor 1 to the analog output Setting range Sen1 Sen2 Presetting device Sen1 HDA 5500 - 1 - X - XX - XXX HDA 5500 - 2 - X - XX - XXX HDA 5500 - 3 - X - XX - XXX Assign sensor 2 to the analog output Assign sensor 3 to the analog output Sen3 Diff HDA 5500 - 1 - X - XX - XXX Assign the difference value (sensor 1 – sensor 2) to the analog output Analog output signal MAMP/ VOLT MAMP For all devices 4..
HDA 5500 Order Code HDA 5 5 0 0 – X – X – XX – 0 0 0 Inputs 0 = 1 Analog Ínput 1 = 3 Analog Inputs 2 = 1 Analog Input + Frequency Input / Counter function 3 = 1 Analog Input + PT 100 - Input Outputs 0 = no switching outputs 1 = 2 relais switching outputs 2 = 4 relais switching outputs Supply voltage AC = 85..265 VAC DC = 12..
Press and hold the mode button for 5 seconds to change menu settings. Power down/up the unit while pressing both arrow keys to Free/Lock the settings.
