User Manual

HDA 5500 User Manual
- 2 -
CONTENTS
1 Introduction 3
1.1
European standards compatibility
3
2 Safety instructions 3
3 Functions 3
4 Operating keys 4
5 Selecting and displaying the unit of measurement 4
6 Installation and commissioning 5
6.1 Mechanical installation 5
6.2 Electrical connection 5
6.3 Supply voltage 6
7 Programming 7
7.1 Adjusting the basic settings 7
7.2 Overview of basic settings menu 8
8 Connecting sensors 12
8.1 HDA 5500 with three transmitters 12
9 Digital display 12
9.1 Standard display 12
9.2 Special display 13
10 Output response 13
10.1 Analogue output 13
10.1.1 Analogue output set to 4..20 mA 13
10.1.2 Analogue output set to 0..10 V 14
10.2 Switching outputs 14
10.2.1 Switching mode 14
10.2.1a) Switch point and hysteresis (SP) 14
10.2.1b) Switching window (Win) 14
10.3 Connection of up to four switching outputs 15
11 Adjusting switching outputs 16
11.1 Switch point and hysteresis 16
11.2 Switching window 16
12 Programming enable 17
12.1 Altering the operating programming enable 17
12.2 Altering the main programming enable 18
13 Technical specifications 19
14 Model code HDA 5500 20
15 Unit dimensions 21
16 Electrical connections 22
17 Error messages 23
18 HYDAC Service 23