Manual

GSM Radio Module CSI-F-10 Page 60
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
7.1.4 Performing a Dialog
Under this menu point, the following settings can be made and output:
7.1.4.1 Program settings
• Date / Time
Date [input actual date]
Time [input actual time of day]
Click on "Apply", to apply the settings. "Back" takes you back to the main
menu.
• GSM
IMEI [displays the IMEI no. of the device]
Own phone number [displays the own phone number]
Signal strength / % [displays the actual network intensity]
Network operator [displays the network operator of the SIM card]
PIN [input the PIN code of the SIM card *]
Click on "Apply", to apply the settings. "Back" takes you back to the main
menu.
* Inputting the PIN code is only necessary if the PIN request is not activated on the SIM card. To deactivate the
PIN code place the SIM card in a mobile telephone and follow the device menu to deactivate the PIN request!
Only if a CM program is active and
numerical and/or boolean input
values can be used in it!