User guide

ContaminationSensor CS1000 Analog Output (ANAOUT)
HYDAC Filtertechnik GmbH
en
Page 67 / 100
BeWa CS1000 3247149n en 2009-02-04.doc 2009-02-04
HDA.ISO – Analog signal ISO to HDA 5500
The HDA.ISO signal consists of 4 measured values (ISO 4 / ISO 6 / ISO 14 / ISO 21
/ Status) which are output sequentially. Synchronization with the downstream control
unit is a prerequisite.
The signal output is as follows:
Time Measurement
category
Signal duration
in s
Current/Voltage
Start signal 0 -- 2 20 mA / 10 V
Pause 2 4 mA / 2 V
Signal 1 > 4 µm 2 Current/Voltage for signal
Pause 2 4 mA / 2 V
Signal 2 > 6 µm 2 Current/Voltage for signal
Pause 2 4 mA / 2 V
Signal 3 > 14 µm 2 Current/Voltage for signal
Pause 2 4 mA / 2 V
Signal 4 > 21 µm 2 Current/Voltage for signal
Pause 2 4 mA / 2 V
Signal 5 Status 2 Current/voltage for signal
Pause 30 4 mA / 2 V