User guide

Condition Monitoring Unit CMU 1000 Page 53
Revised 17.12.2009 HYDAC ELECTRONIC GMBH Mat.-No.: 669749
• Channel I to Channel P
- Name [Enter name]
- Mode [Off / Manual / Autodetect]
- Input signal *) [HSI / 0..20 mA / 4..20 mA /
0..5 V / 0..10 V / 0.5..4.5 V / 0..50 V /
0.5..5.5 V / 1..5 V / 1..6 V / -10..+10 V]
- Low range [Enter low range]
- High range [Enter high range]
- Decimal format [0 / 0.0 / 0.00 / 0.000]
- Unit [Enter unit]
*) Possible input signals channel-dependent
• Channel Q and Channel R
Name [enter Name]
Mode [Off / Active]
High range [enter High range]
Factor [enter Factor]
Decimal format [0 / 0.0 / 0.00 / 0.000]
Unit [enter Unit]
Peripherals - PWM settings (Analog outputs)