User's Manual

4
Clicking on the button will freeze the logger data in place. Double-clicking
the logger of choice will allow additional information about individual loggers to be
gathered.
Click the button to clear the screen of all data.
Setting Up the Logger
Click on the icon.
Select one, or multiple, logger(s) by ticking the corresponding checkbox. Please
note:
Click the Patrol slots for which the logger should be active for a patrol (default:
maximum of 8 slots per day per logger). A denotes a selected Patrol time, whilst a
denotes a deselected Patrol time.
Under the “Logger” sections, select the time at which the logger should take a
reading (default: 2am), select the Confirmation delay time (default: 1 hour), and
select which days of the week to take a reading (default: Monday – Friday).
Note: Ensure the appropriate check boxes are ticked at the top of the window,
otherwise the logger may be programmed incorrectly. It is advised to always have
“Date/Time” ticked.